Product Details

Traxxas E-Maxx Brushless RTR w/2-5000mAh LiPos & Chargers TRA3908L


This is the Traxxas E-Maxx Brushless 4-Wheel Drive Ready-to-Run Electric Monster Truck with two Traxxas Power Cell 5000mAh 3-Cell LiPo batteries, and two balancing chargers!
E-Maxx Brushless Edition (model #3908L) comes fully-assembled and Ready-To-Race with the TQi 2.4GHz radio system with Docking Base installed and adjusted, factory-installed telemetry sensors, Castle Creations Mamba Monster brushless power system, Traxxas Power Cell LiPo batteries, balancing LiPo chargers, painted and decaled ProGraphix body, pre-glued tires, and detailed instructions. Traxxas backs the E-Maxx Brushless Edition and all of their products with top-notch support that is second to none.
E-Maxx Brushless Edition, the Ultimate Electric 4X4 Monster!
Now with Traxxas TQi 2.4GHz radio system with docking base, factory-installed telemetry sensors, Castle Creations Mamba Monster Power, LiPo batteries and chargers
Includes two Traxxas Power Cell LiPo Battery packs (5000MAH, 11.1V, 25C, 3 cell)
Includes two 2-Cell/3-Cell LiPo Balance Chargers
TQi 2.4GHz High Output radio system with Docking Base and Factory-Installed Telemetry Sensors
TQi 2.4GHz High Output transmitter
TQi Docking Base
Automatically stores and loads settings for up to 30 Traxxas Link-enabled models - just switch on and drive, "model selection" is not required
Multi-Function knob
Adjustable steering and throttle percentage (dual rates)
Adjustable steering and throttle sensitivity (exponential)
Adjustable steering and throttle end points
High 13ms frame rate and near-zero latency for responsive control
Telemetry-ready 5-channel micro receiver with dual channel-1 input
Docking Base accepts iPhone and iPod touch (sold separately) for full Traxxas Link application functionality
Factory-installed speed, RPM, temperature, and voltage telemetry sensors
TQi 2.4GHz 5-channel micro receiver (#6518) with fail-safe security and integrated telemetry ports
Adjustable four-position wheelie bar
Castle Creations Mamba Monster ESC
6.5mm gold-plated connectors
Integrated cooling fan
Heavy-duty construction
Castle Creations Mamba Monster 2200KV Motor
Machined heatsink can
5mm rotor shaft
Heavy-duty 17mm splined aluminum hex hubs and wheel nuts
Tunable sealed differentials in Maxx differential housings
Backward compatible to all Maxx models
Differential uses Revo-Spec gears and components
Revo-Spec front, rear, and center driveshafts
New heavy-duty Brushless Ready transmission
Over two-times stronger than original E-Maxx transmission
Steel idler gear
Optional accessory two-speed adjustable ratio gear sets
Revo-Spec Torque-Control slipper clutch
Quick release battery hold down straps
Reversible to accept stick packs and side-by-side packs
Available accessory battery strap for oversized battery packs (sold separately)
Long wheelbase, low center-of-gravity chassis
Increased stability
Extended by 30mm
Accepts 6-cell or 7-cell flat battery packs and LiPo packs of similar size
Batteries sit lower in the chassis for lower CG
Lower skid plate protects the center driveline while allowing quick access to the transmission
Waterproof high-torque dual steering servos (#2075)
Four-channel 2.4GHz micro receiver
Two channel-one outputs for dual steering servos (no Y-harness required)
Precision hex hardware throughout
6.3" diameter Maxx tires pre-glued on black-chrome Split-Spoke wheels
Two-piece gear cover makes it easy to access and change gearing
Requires removal of only one screw for access
Sealed pivot balls and front/rear outer driveshafts
Eight fully-adjustable, coil-over Ultra Shocks
Integrated dual servo bellcrank and servo saver
Watertight sealed receiver box
100% captured steering and toe linkage
Double-shear components capture and secure all rod ends for unmatched durability
Rear toe links are captured by a thick tie-bar for double-shear strength
Updated shock towers and adjustable body mounts
Gray composite components
Chassis, skid plates, bulkheads, shock bodies, spur gear cover
Precision rubber-sealed ball bearings
Blue-anodized aluminum antenna crimp nut
Four-position wheelie bar included
Fully painted, trimmed, and decaled ProGraphix body
Designed From the Start for Brushless Speed and LiPo Power
At Traxxas, we don't make conversions. We built it right the first time. So, when our engineers sat down to design the E-Maxx, they made sure it had all the strength and durability needed for today's most powerful aftermarket brushless setups. Give E-Maxx all you've got; its Brushless-Ready™ transmission is built for the burliest brushless motors, and the included Power Cell 5000mAh LiPo batteries unleash hard-hitting "6S" horsepower when you put the hammer down. Every component between the E-Maxx's motor and the tires is proven tough for full-throttle fun, pack after pack, with the durability and reliability you expect from Traxxas.

Power Cell LiPo Batteries Included!
Designed from the start for high-voltage, high-capacity LiPo packs, the E-Maxx Brushless Edition now includes a pair of genuine Traxxas Power Cell LiPo battey packs - the only LiPos certified to give you the punch and on-demand power to reach the top speeds the E-Maxx Brushless Edition is built to achieve. Engineered specifically for Traxxas vehicles, Power Cell LiPo batteries feature heavy-duty construction with oversized solder tabs, 12-gauge Maxx Cable wire, and High Current connectors to deliver maximum efficiency, power, and run time. The E-Maxx includes two 5000mAh 3-cell (3S) packs to unleash a full 22.2 volts of dirt-roosting power and the E-Maxxs's full performance capability.

Dual LiPo Balance Chargers Included!
Charging care is vital to LiPo life and performance, so a pair of 2-Cell / 3-Cell LiPo Balance chargers are included to keep the E-Maxx's Power Cell LiPos running strong. Just plug the battery's balance plug into the charger and you're on the way to another run - no programming or settings required. Every time a pack is charged, the cells are charged individually to precisely balance voltage for optimum performance, run time, and cycle life.

TQi: The Next Generation of Traxxas 2.4GHz Control
E-Maxx Brushless Edition is equipped with the world's most advanced Ready-To-Race radio system. The all-new Traxxas TQi radio system with Docking Base turns your iPhone or iPod touch into a powerful tuning tool. The device display combines with the Traxxas Link App to deliver an intuitive, high-definition, full-color graphical user interface that optimizes your radio system for ultimate vehicle control. Automatic model recognition instantly recalls your settings for up to 30 Traxxas Link-enabled models - just switch on and drive. This powerful App gives you complete control over the operation and tuning of the E-Maxx Brushless Edition with an intuitive, high definition graphical user interface. Once you have created the perfect control settings for your model, you can save them as a profile that you can restore later, use on another model, or share with friends. Factory-installed Traxxas Link telemetry sensors transmit real-time data including speed, RPM, temperature, and battery voltage with stunning visuals (requires iPhone or iPod touch).
Powerful Traxxas Link Application
Traxxas Link makes it easy to learn, understand, and access the powerful tuning options built into every Traxxas TQi radio system. Control your Drive Effects settings such as steering and throttle sensitivity; steering percentage; braking strength; and throttle trim by simply touching and dragging the sliders on the screen, or enabling the Multi-Function knob on the transmitter. Everything happens live, on-the-fly, giving you instant feedback on your changes.
Instant Performance Feedback With Installed Telemetry Sensors
The E-Maxx Brushless Edition arrives with telemetry sensors installed, ready to bring the Traxxas Link dashboard to life with real-time speed, battery voltage, RPM, and temperature data. The dashboard is fully customizable with either dial or digital readout gauges. Up to nine gauges can be displayed at once. Set threshold warnings and log maximums, minimums, or averages. Use the recording function to document your dashboard view, with sound, so that you can keep your eyes on your driving and not miss a single apex. If you forget to record, simply touch Instant Replay anytime to capture the previous minute of fun and unexpected triumphs. The recordings can be named, saved, and shared with others.
Once you have created the perfect control settings for your model, you can save them as a profile that you can restore later, use on another model, or share with friends. If the track conditions change, simply re-tune your Drive Effects and save them as new profile. Only Traxxas Link makes pro-level transmitter tuning so fast, convenient, and easy.
Castle Creations Mamba Monster Brushless System
Built specifically to handle the rigors of large, power-hungry trucks, the Mamba Monster speed control is ready for 6S LiPo power with its massive 6.5mm gold-plated connectors, high-efficiency heatsink, integrated cooling fan and heavy-duty components. The speed control sends its power pulses to a Castle 2200Kv 75mm motor, designed specially for maximum performance and reliability with 6S LiPo power in torque-hungry applications. The aluminum motor can is machined to act as a massive heatsink, high-grade bearings deliver maximum efficiency, and high-strength Neodymium magnets give E-Maxx Brushless Edition outrageous torque. To resist the twist, a beefy 5mm shaft transfers power to the Brushless-Ready transmission.
Heavy-Duty 17mm Hex Hubs
E-Maxx Brushless Edition's 17mm splined aluminum hex hubs make certain its considerable horsepower is delivered directly to the treads. The splined design is extra strong with unsurpassed torque handling to resist twist-out no matter how hard the 2200Kv motor pulls at the tires. The unique hex-hub shape also accepts standard 17mm-hex wheels.
Massive 6.3" Maxx Tires
Extreme Brushless Power goes wasted if the tires can't put the power to the ground. E-Maxx Brushless Edition has it covered with some of the toughest treads in Traxxas' arsenal, the aggressive Maxx tires used on the hard-hitting Revo 3.3 and T-Maxx 3.3. These massive meats offer tenacious grip, and their huge footprint gives E-Maxx greater stability and generous ground clearance for all-terrain fun. The tires are securely mounted to Twin-Spoke wheels, now covered in sinister black chrome as part of the exclusive Brushless Edition look.
Adjustable Wheelie Bar
To handle extreme brushless power, the adjustable Traxxas wheelie bar is mandatory equipment for the E-Maxx Brushless Edition! Four snap-in adjustment positions allow you to choose how extreme you want your wheelie action to be. In the down position, it keeps the front end planted to show off E-Maxx's incredible acceleration. Raise the wheelie bar to its full-up position and the action gets wild, with giant wheelies that hang on as long as you keep mashing the throttle! The wheelie bar's unique design allows it to be easily removed in situations where you may not want the additional control.
Type: 4WD Brushless Monster Truck
Scale: 1/10
Length: 22.5 inches (571mm)
Width: 16.5 inches (419mm)
Wheelbase: 13.2 inches (335mm)
Weight: 154oz (4.36kg)
Drivetrain: Shaft-Driven 4WD
Tire Type: Maxx (6.3" x 3.8")
Motor or Engine: Castle Creations Mamba Monster 2200KV
Speed Control: Castle Creations Mamba Monster ESC
Gear Pitch: 32-Pitch
Wheel Size: 3.8" Split-Spoke (black chrome)
Shock Type: XXLong
4 AA batteries for transmitter

Please Choose:

Add to Cart: