Product Details

Futaba 6JA Air 2.4G SFHSS R2006GS 4-S3004 FUTFUTK6001

$102.00

Features

Futaba - FUTFUTK6001 - 6JA Air 2.4G SFHSS R2006GS 4-S3004

Selectable S-FHSS and FHSS modes, the included R2006GS receiver automatically adapts to the selected mode
Capable of 4 channels only in FHSS mode
Fail safe on all channels in S-FHSS mode only (throttle channel only when FHSS mode is selected)
15 model memory with 4 character model naming
40x40 127 segment LCD display
Modes 1-4 selectable by pilot
R2006GS high-voltage (4.8 - 7.4V) 6-channel receiver with Easy-Link circuitry, frequency hopping, spread spectrum design and Dual
Antenna Diversity
Endpoint adjustment (EPA), sub trims, servo reversing & throttle cut
Throttle position, mix and low battery warnings
Trainer system (trainer cord not included)
One year limited warranty through Hobby Services beginning at date of purchase
Airplane Features; Two programmable mixes and two 5-point throttle curves
Two 5-point pitch curves
Flaperon with differential rate
Flap trim (2 rates)
V-tail mixing
Elevon mixing
Helicopter Features; Two 5-point throttle curves
Three 5-point pitch curves
Throttle hold
Hover pitch
Gyro and revo mixing
Four swash plate types (H1, H3, HR3 & H3 w/AFR)
Swash AFR (ail/ele/pitch)
Throttle mix
Electronic swash ring
Throttle and pitch delay
Specifications

Futaba - FUTFUTK6001 - 6JA Air 2.4G SFHSS R2006GS 4-S3004

Transmitter;
Type: 2-stick, 6-channel, FHSS/S-FHSS selectable
Frame Rate: 6.8ms
Current Drain: 170mA Receiver;
Modes: FHSS or S-FHSS (auto selectable)
Power Requirements: 4.8V-7.4V
Compatible Batteries: NiCd, NiMH, LiPo, LiIon & LiFe
Dimensions: 1-11/16 x 15/16 x 5/16" (43 x 24 x 7.9mm)
Weight: 0.29oz (8.3g)
Current Drain: 80mA (@ no signal) S3004 Servo;
Speed: 0.23 sec/60° @ 4.8V 0.19 sec/60° @ 6.0V
Torque: 44 oz-in (3.2 kg-cm) at 4.8V 57 oz-in (4.1 kg-cm) at 6.0V
Dimensions: 1.6 x 0.8 x 1.4" (1-9/16 x 13/16 x 1-7/16") 40 x 20 x 36mm)
Weight: 1.3 ounce (1-5/16oz) (37 grams)
Connector: "J" type with approx. 5" wire
COMMENTS: To use the NiMH battery FUTM1473, you will need to purchase
charger FUTM1832. Than call Futaba Services at 217-398-8970
option 2 and they will send you a battery door- HSP82469. If
you already have a charger and need a charge lead they can
sell you part number- HSP29615. (requires soldering on the
correct charger plugs)
Requires

Futaba - FUTFUTK6001 - 6JA Air 2.4G SFHSS R2006GS 4-S3004

AA Cells: Four for transmitter
Includes

Futaba - FUTFUTK6001 - 6JA Air 2.4G SFHSS R2006GS 4-S3004

Futaba 6J 6-Channel Transmitter, R2006GS Receiver and Instruction Manual, Neckstrap, Servo Tray and Mounting Hardware, On/Off Switch
and ratchet spring
Four S3004 Standard Ball Bearing Servos, FUTM0004 There is an optional NiMH battery which can be used,
FUTM1473. To use this, you will need to purchase a new
battery door and charge lead from Futaba Services, see comments.
Includes

Futaba - FUTFUTK6001 - 6JA Air 2.4G SFHSS R2006GS 4-S3004

Futaba 6J 6-Channel Transmitter, R2006GS Receiver and Instruction Manual, Neckstrap, Servo Tray and Mounting Hardware, On/Off Switch
and ratchet spring
Four S3004 Standard Ball Bearing Servos, FUTM0004 There is an optional NiMH battery which can be used,
FUTM1473. To use this, you will need to purchase a new
battery door and charge lead from Futaba Services, see comments.

Add to Cart: