Product Details

ESM Lavochkin LA-7 Color F 80" Wingspan Model ARF


Wing Span: 80" (2032 mm)
Length: 65" (1650 mm)
Wing area: 67.39sq. ft (68.7 sq dm)
Wing Loading: 37.2 oz/sq. ft (113.6 g/sq. dm)
Flying Weight: 16.9 lbs (7700g) *Weight Information
Radio: 6ch & 8 servos
Gas Engine: 36cc – 55cc engines such as the PTE36 or the DLE-55. Most planes are tail heavy, so the larger or heavier engines can be used with good throttle management.
Glow Engine: 1.60 2 cycle or 1.80 4 cycle
Prop Recommendation: : 3-blade is scale. Use a Biela 17x10 3 blade with the PTE-36
Servo Recommendations: : 100 oz-sq-in minimum - HD-1501, Hitec 645MG, Hitec 5645MG, DS-8309TG

The Lavochkin LA-7, as with all of ESM’s scale models, is loaded with features never before found in such low priced ARF’s, resulting in highly detailed, great looks, and great flying ARF's!

The detailed fuselage is poly resin fiberglass, with scale panel lines and rivets molded right in. Wings are typical built up construction, include pre-designed cavity's and mounting blocks for optional scale retracts, and have factory constructed flaps, all of which is then factory covered with an etched polyester film. All parts are finally expertly painted right at ESM's factory, and once dry, all scale decals are pre-applied, and are then covered with a factory clear coat for protection.

All ESM planes are painted with a very high quality enamel paint which is resistant to oil, grease, and fuels. The high gloss paints are of course easier to clean than the low gloss. These paints can be painted over for weathering and the like.

The ESM Lavochkin LA-7 comes from the factory with conventional gear and wheels, and one of the more complete hardware packages anywhere...including screws, rods, fuel tanks...etc. ESM also offers a complete line of retracts for each individual plane, adding to the level of scale realism that all scale pilots look for in an ARF.

Add to Cart: