Product Details

ESM F4U Corsair Color F 74" Wingspan Model ARF


Wing Span: 74.2"
Length: 57.9"
Wing area: 6.7 sq. ft.
Wing Loading: 35.3oz/sq. ft.
Flying Weight: 14.7lbs. *Weight Information
Radio: 6ch & 8 servos
Gas Engine: 26cc to 36cc (We highly recommend the PTE-36)
Glow Engine: 1.08 2 cycle or 1.20 4 cycle
Prop Recommendations: : Biela 16x8 or 17.3x8 4 blade
Servo Recommendations: : 100 oz-sq-in minimum - HD-1501, Hitec 645MG, Hitec 5645MG, DS-8309TG


The F4U Corsair, as with all of ESM's scale models, is loaded with features never before found in such low priced ARF's, resulting in highly detailed, great looks, and great flying ARF's!

The detailed fuselage is poly resin fiberglass, with scale panel lines and rivets molded right in. Wings are typical built up construction, include pre-designed cavities and mounting blocks for optional scale retracts, and have factory constructed flaps, all of which is then factory covered with an etched polyester film. All parts are finally expertly painted right at ESM's factory, and once dry, all scale decals are pre-applied, and are then covered with a factory clear coat for protection.

All ESM planes are painted with a very high quality enamel paint which is resistant to oil, grease, and fuels. The high gloss paints are of course easier to clean than the low gloss. These paints can be painted over for weathering and the like.

The ESM F4U Corsair comes from the factory with conventional gear and wheels, and one of the more complete hardware packages anywhere...including screws, rods, fuel tanks...etc. ESM also offers a complete line of retracts for each individual plane, adding to the level of scale realism that all scale pilots look for in an ARF. Optional rotating retract with oleo struts, alloy wheels are available from ESM. These generation 5 Air up/air down retracts, which incorporate all of the latest design improvements.

Add to Cart:

Customers who bought this product also purchased...