Product Details

EG Aircraft Corvus Racer 120cc Model Plane, ARF (Scheme A) EGCORVRAC.120.A

$469.00

With its large aileron and elevator design, the Corvus Racer model plane from EG Aircraft was made for 3D aerobatics.
Features

Adjustable pushrods for easy fine tuning
Larger aileron and elevator design. Up to 60 degrees of throw on all control surfaces for excellent 3D aerobatic flying.
3D aerobatic flying
High quality ball link assemblies
High density rubber wheels
Servo lead safety clips
High performance cap head screws
Full length tuned pipe design in fuselage
Flat nylon hinges for better flying strength
Honeycomb Board carton packing for safer transportation
Pre-hinged control surfaces
Pre-assembled and mounted gas tank
Installed servo wire guide tube
Two pieces removable wings and stabs
Fit new DLE60 and DA60 Engines with more stronger design for fuselage and wings
Fixed ring inside cowling for easy build
Removable rudder
Extra covering provided for small repairs and covered in Genuine Ultracote / Oracover
Complete and detailed instructions on CD
The Corvus Racer 120cc model plane from EG Aircraft was made for 3D aerobatic flying. With its large aileron and elevator design, you can have up to 60 degrees of throw on all control surfaces. This giant-scale RC plane comes with adjustable pushrods for easy fine tuning and pre-hinged control surfaces. Because this is an ARF plane, there are several items you will need to complete the model. Please refer to the “You Will Need” section for more details. This EG Aircraft model plane is very well designed and gives 3D pilots the ability to perform thrilling aerobatics. Order yours now.
What you Need

100-120cc gas engine (DA100)
4+ channel radio (SPM88001AU)
8 servos with 180-330oz (11-20kg/cm) (JRPS8921HV)
Receiver (SPMAR12200)
2 LiPo batteries (TPB3800-2SPPRX)
Wing Span 91" (2300mm) Length 88" (2340mm) Wing Area 1500sq. in (96.8sq. dm) Flying Weight 16.5-18lbs (7500-8200g) Engine 50cc-70cc gas Radio 4CH/6S BrandEG Aircraft

Add to Cart: