Product Details

DJI S800 Spreading EVO Kit + WooKong M GPS


The Professional Hex-rotor Platform Big Aircraft
Spreading Wings S800 is a professional Hex-Rotor Platform Big Aircraft, designed for commercial aerial photography (AP) and experienced model enthusiasts. It has the advantage of stable flight, large load weight and long flight time. Combined with DJI WooKong-M multi-rotor autopilot system, S800 can easily perform precise hovering, constant-speed cruise and big maneuverability turning.

Circuit-integrated Centre Frame
All the circuitries from batteries to electronic components of Frame Arms, PMU and gimbals are integrated into Centre Frame, which simplifies the wiring,reduces the possibility of malfunction and helps a lot to operate quick disassembly.

High-integrated Frame Arms Design
With innovative integration design of Frame Arms, all the power and signal wires of motor, ESC and LED indicator are embed into Frame Arms, which makes the S800 Frame Arms look simple and neat, not a batch of separated parts and wires. Special slot design makes Frame Arms and Centre Frame with a complete circuitry. The overall design is safe, reliable, simple and stable, proved by long-time strict testing.

Integration Design Of Esc
The components of ESC are installed inside the neat Frame Arms beneaththe motors, which solve the problem of heat radiating. LED indicator isincluded to ESC, and can be used to easily identify the nose and tail for S800.

The High Performance Brushless Motors
Brushless motors with special design and high performance reduce noise and vibration, smooth turning, improve the stability and performance of aircraft, simplify maintaining and extend its lifetime.

High Efficient Carbon Fiber Propellers
All the carbon fiber propellers of S800 have been tested for its balance and strictly selected. The carbon fiber propellers have the characteristic of exquisite appearance, light weight, high efficiency, and high strength and so on.

Clear Installation Sign
Clear guiding signs for connection are shown on the Centre Frame and Frame Arms. The connection sequence between Frame Arms and Main Controller is also shown as signs which help avoid incorrect installation.

Quick Assembly And Disassembly Landing Skid
Simple steps to assemble and disassemble S800 Landing skid, rather convenient to carry and transport. Almost the whole high strength landing skid is made of carbon fiber material, which can support large weight loading with two aspects of tenacity and hardness.

Perfect Wookong-M Matched
WooKong-M IMU installation position has been reserved in the Centre Frame. In addition, signs on the slot of the Centre Frame clarify the channels’ numbers of the WooKong-M IMU, which helps users to install the autopilot system correctly and rapidly.

Diagonal Wheelbase: 800mm
Frame Arm Length: 350mm
Center Frame Diameter: 24mm
Bi-pod Size: 500 x 415 x 320 mm
Top Width: 145mm
Take Off Weight: 5.0 - 7.0kg
Load Weight: 0 to 2.5kg
Power Battery: 100000mAh to 15000mAh, 15C (min.)
Max Power Consumption: 2100W
Hover Power Consumption: 710W (@ Take off weight 6kg)
Hover Time: Max 16min (@ 10000mAh and 6kg take off weight)
Moter Stator Size: 41 x 14mm
Motor KV: 320rpm/V
Motor Max Power: 360W,
Motor Weight: 147g
ESC Current: 40A OPTO
ESC Voltage: 6S LiPo
ESC Signal Frequency: 30Hz - 450Hz
ESC Drive PWM Frequency: 24KHz
ESC Weight: 18g
Propeller Material: Barbon Fiber
Propeller Size: 15 x 04 in
Propeller Weight: 15g
S800 Kit x 1 Set
WooKong M Autopilot Module x 1
GPS Module x 1

Add to Cart: