Product Details

Associated 1/10 RC10B4.1 Factory Team Worlds Buggy Kit


This is the 1/10 scale electric powered, radio controlled,
Associated RC10 B4.1 Factory Team Competition Worlds Buggy Kit.

FEATURES: Chassis: Molded composite bathtub style, +8 B4.1 chassis conversion
Drive: Two wheel with CVA drive shafts with pin retainer clips with
steel center-drilled front axles
Transmission: 2.6:1 laydown type, high-torque capacity, V2 slipper
assembly with high rate spring for more consistent slipper clutch
Ball Bearings: Full set, 14 rubber sealed
Shocks: Factory Team V-2 oil-filled hard anodized threaded with bleed
screw caps, 30 weight silicone shock oil, Factory Team blue
aluminum shock bushings and pivot balls
Dog Bones: MIP CVDs
Differentials: Ball type with lightweight outdrives
Spur Gear: Plastic, 81 tooth, 48 pitch
Front Tires: Pro-Line M3 4 rib inner diameter: 2.2" (55.88mm), 1"
(26mm) wide with foam inserts
Rear Tires: Pro-line M3 Holeshot high traction, outer diameter 3.15"
(80mm), inner diameter 2.2" (55.88mm) with foam inserts
Wheels: Yellow dish front; diameter 2.2" (55.88mm), width 0.87"
(22.31mm), rear; diameter 2.2" (55.88mm), width 1.42" (36.08mm)
Body: Pro-Line Bulldog +8mm
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Toe-In: Fully adjustable, with titanium turnbuckles, toe-in describes
the angle of the front tires as viewed from the top
Suspension: Optimized for use with LiPo batteries, mounts for 4°,
3.5°, 3°, and 2.5° rear toe
Turnbuckles: Factory Team blue anodized titanium turnbuckles
Front axles: Steel center drilled
Rear Hubs: Factory Team 0°
Steering: Angled-bellcrank design to minimize bump steer and maintain
constant steering angles throughout the range of suspension travel
Forward-swept front end design provides maximum front end ground
Servo saver: Built-in with aluminum servo saver bolt and heavy duty
Battery Strap: Carbon fiber with blue aluminum thumb screws

INCLUDES: Associated RC10 B4.1 Factory Team Worlds buggy kit, clear Pro-Line
Bulldog +8mm body with wing, decals, tires, wheels, shock oil and
instruction manual

REQUIRES: Radio: Two-channel with high-speed servo
Radio Batteries: (8) AA size
Pinion Gear: Number of teeth to be determined by motor
Motor: 540 size for buggy applications
ESC: To match selected motor
Battery: 6-cell NiMH with standard connector OR 2S LiPo battery
Battery Charger: To match selected battery
Building and track equipment

SPECS: Vehicle;
Length: 15.16" (385mm)
Width: 9.84" (250mm)
Weight: 3.38lbs (1535g) running weight will vary depending on parts
Wheelbase: 11.06" (281mm)
Internal Gear Ratio: 2.6:1
Length: 10.9" (276mm)
Width: 5.6" (143mm)
Height: 2.4" (62mm)

Add to Cart: