Product Details

3W-55i Engine


Suitable for 3D-flying of our XTRA /230 and VOTEC/ 230-FUNS or other Funflyer with a maximum take off weight of 9,0kg. A good choice for Scale models or for towing Sailplanes. The crankshaft with its 3 ball bearings ensures proper running characteristics. With a suitable 3W-muffler system a power out put is possible which can be compared with engines of 70ccm of other manufactures. The engine can be used for a wide range of models. Characteristics are its long life and reliability.

The micro processor controlled igniton allows to easy start the engine. The programmed timing curve is laid out for the engines and guarantees a good running characteristic in all RPM – ranges. An out put signal to monitor RPM is standard as well as a LED showing the status of the ignition.The voltage range of the standard ignition : 6V – 8,4V ( 2 cell LIPO battery ).
Techn. specifications
Cylinder capacity 3.23 cu in
Power 5.20 HP
Power Rating 3.82 KW
Bore Diameter 1.77 inch
Stroke 1.38 inch
Speed range 1300 - 8500 rpm
Weight 4.27 lbs, incl. Ignition
Crankshaft 3 ball bearings
Oil / Gasoline Ratio 1 : 50 / 2% Mix
IIS - Ignition 6 - 8,4 V
Propeller 2-bladed 22x8; 22x10; 22x12; 24x8
Propeller 3-bladed 22x10; 22x12

Add to Cart: